Skaffat mig scanner

uniden-bearcat-ubc9000xltJag har skaffat en scanner igen. Jag blev av med min för ett antal år sedan när en polare ”glömde” den i sin bil han monterat den i och sedan sålde. Det var ingen värdefull scanner, men enkel och lättskött och nog lite av ett barndomsminne för jag fick den — som jag minns det när jag var 13–14.

Men jag tyckte det kunde vara lite kul med en ny och lite mer avancerad. Köpte den av en kompis och har inte hunnit sätta mig in i dess funktioner så mycket än. Tråkigt är väl att den inte går att programmera från dator utan allt måste göras manuellt men det får gå. Göra en frekvens/kanallista och sedan sätta igång och knappa… Tänker man rätt gör man ju inte om det igen.

Det är en Uniden Bearcat UBC9000XLT och den har vad jag förstått fått bra kritik. Vi får se.

Här kommer lite tekniska data för nördar:

Specifications

  • Coverage: 25-550 & 760-1300mhz (gap on UHF-tv)

  • Channels & Banks: 500 Channels in 20 banks. (25 ch per bank)

  • Scan and search-speed: 100 ch/steps per sek (300 steps/sek with 5khz-steps)

  • Modulations: AM, NFM and WFM

  • Steps: 5 12,5 25 50 khz-steps

  • Priority-channels: 10, one in each 10 first banks, can only have one per bank.

  • Sensetivity: 25-512 Æ .4µV

  • 118-136, 225-399 Æ 1.0µV
    406-1300 Æ 0.6µV
  • Selectivity: -6dB/-50dB AM/NFM 12KHz/25KHz

  • IF’s: 380.7/254.4, 58.075, 0.455 MHz

  • Power supply: 13.8v (included) about 0.7A

  • Connectors: Antenna (BNC), Audio, Earphone output and tape-control (RCA). The tape-control can control a cassette-deck that has this feature. You can select channels on the scanner to record.

  • Autostore and Autosort: AutoSort automatically sorts the frequencys within all banks
  • for faster searching, AutoStore stores the frequencys found automatically in selected bank(s). The last one is a great idea that don’t work to well duh on most bands duh to all none-conversation frequencys it stores. Please note that autostore dont care about if the freq is locked out ;(

  • Data Skip: Skip’s channels with has none-speach contents
  • This don’t work very well by personal experiences. Please note that it waits for 3 secs before it goes on.

  • VFO Control: Use the VFO-control (the wheel) to easly change Frequencys and channels. The VFO can be LOCKED as well.
  • Attenuator: Eliminates intermodulation from nearby frequencys etc. All channels can have it on or off independent.

  • Delay: When on the scanner waits for 2sec for a reply. Can be setted independent for all channels.

  • Lockout: All channels can be locked out independent. Locked out channels are (OF COURSE) not scanned. 50 Frequencys can be locked out when searching. When 50 has been reached it starts to overwrite the 1th and so on No possibility is present to view and change the freqs other then scrolling thought with the VFO and pres L/O.

  • Alpha-tagging A alpha-tag can be assigned to the first 250 channels. What it simply means is that you can assign a ”name” to the channels So it reads ”local police ch32” insteed of just 79,5125 etc.

  • LCD The LCD is of Dot Matrix type with backlite in high, dim and off-modes. I find it VERY bright and easy to read, a control for contrast would be nice duh.

  • Audio Output: 3 Watts @ 8 ohm – ~10% Distortion. Internal speaker is GOOD and gives a LOUD sound.<&KU>
  • Size, weight etc: 10″(W) x 4″(H) x 8″(D) or 25cm (W) x 10cm (H) x 20cm (D)

  • Optional stuff: CTCSS Tone, External Speaker Ext. Warranty, Earphone, Mobile antenna, DA301 Antenna AS300 Ant, WideBand PreAmp, amped Speaker.
  • Andra bloggar om: ,

    Posted from Stockholm County, Sweden.

    Kommentera